gbwg, woodturning, kincardine, woodturn, grey-bruce

Grey-Bruce Woodturners Guild


S  h  a  r  i  n  g    t  h  e    a  r  t    a  n  d    c  r  a  f  t    o  f    w  o  o  d  t  u  r  n  i  n  g

GBWG Home Page GBWG Gallery Page GBWG Membership Page GBWG Events Page GBWG Newsletters Page GBWG Turning Links Page GBWG Tips & Jigs Page GBWG Woodturning Classified Page GBWG Contact Us Page


Please visit our sponsors
(click on ad for link)

 

 

 

Tips & Jigs

What's New

Face Plates from Video Heads . Our friend, Les Swift of the Peninsula Turners in Victoria, Australia, shares another great tip with us. This time he writes about using old video heads to make faceplate. (recycling at it's best)

"Thanks again Les"

Archives

Antistatic Remedy For Faceshields (Al Galbraith)
Bandsaw Jig (Jeff Parsons)
Centre Finder (Irwin Seidman)
Chatter Spinning Top (Larry Hancock)
Decorating Material for Turnings (Ken Goldspink)
Drill Press Jig (Les Swift)
Hollow Vessel Tutorial (Edric Florence)
How Dry Is My Wood (Brian Clifford)
Instructional Video Clips (Brian Clifford)
Malt Vinegar Rust Remover (Ken Goldspink)
Masking Tape Toolrest Template (Irwin Seidman)
Natural Edge Bowl Tutorial (Edric Florence)
Removing Dovetails (Les Swift)
Rotary Vacuum Connection for Lathes With Threaded Outboard Spindles (Ken Goldspink)
Sanding Discs: Save Money & Cut Your Own (Maurie Taylor)
Toolrest Care (Larry Hancock)
White Glue Treatment (Wally Dickerman)

 

We are always looking for more tips & jigs to post in this reference section. Please send your ideas along with any pictures, diagrams and detailed description to tips@gbwg.ca. Thanks

 

Top of Page

This page was last updated April 2, 2005
Images and web site content © Grey-Bruce Woodturners Guild (GBWG) and/or the individual artist.
This site is best viewed using Flash Player and Microsoft Internet Explorer 5.0 or later.
If you experience any difficult accessing these pages, please contact the GBWG Web Administrator